Products

Test Inks PINK

Pink coloured Test Inks are special testing liquids in ranges of defined surface tension. They were developed to get "non-toxic" Test Inks. These pink Test Inks meant to substitue the blue coloured inks as they were declared to be toxic according to DIN 53364 / ISO 8296.
The Pink Test Inks are available in bottles or in pens.

Test Inks in bottles PINK

from 28 to 60 mN/m in steps of one by one
accuracy +/- 0,5 mN/m
observation time 28 to 60 mN/m is 5 seconds
bottles containing 10, 100, 250 or 1000 ml
or in sets of 7 bottles each 10 ml

Test Pens PINK

from 28 to 60 mN/m in steps of 2 by 2 with accuracy +/- 1. mN/m simple handling no spilling Pen sets from 28 to 60 mN/m available in sets
of 4, 6 and 8 pcs. or as single pens

Test Inks BLUE

Blue coloured Test Inks are special testing liquids in ranges of defined surface tension (in accordance with ISO 8296 / ASTM 2578 / DIN 53364). The surface tension of a substrate is checked by simply applying the Test Ink to the surface. The blue Test Inks are available in a range from 18.4 to 105 mN/m. Test Pens filled with blue Test Ink are available from 28 - 70 mN/m. Test Inks blue are toxic from 24 to 56 mN/m surface tension.

Test Inks BLUE

available from 18.4 to 105 mN/m (18.4, 76, 84, 90, 105 colourless) with accuracy +/- 0.5 mN/m observation time is 2 seconds bottles containing 10, 100, 250 and 1000 ml or in sets of 7 bottles of 10 ml each

Test Pens BLUE

from 28 - 60 mN/m in steps of one by one from 62 - 70 mM/m in steps of two by two with accuracy +/- 1.0 mN/m observation time is 2 seconds simple handling no spilling

Quicktest 38®

Quicktest 38® serves to check if the treatment of polyolefins (polypropylene, polyethylene, polybutylene) has shown an effect onto the material. A stroke of the pen leaves a full line on the material if the material´s surface tension has a value of 38 mN/m or more. If the material´s surface tension is below 38 mN/m, the fluid contained in the pen will form small drops on the surface. The fluid applied to the surface will dry within seconds, it doesn´t need to be wiped off anymore.
item no.: 40.55100.0

Quicktest38®

item no. 40.55100.0
Advantages:
extremely easy to handle perfect for quick checks on polyolefins no wiping off necessary, lasting display of result archiving of the image posible


Attention:
The test fluid of Quicktest 38® contains solvent. This might cause wrong results being displayed on materials not being solvent resistant!

Equipment

Carrying cases

Small suitcase
item no. 40.31800.0
For 7 test ink bottles of 10 ml
with compartment for test pens
(set of max. 4) or 1 pack of cotton swabs.
Without content.

Carrying cases

Large suitcase:
item no. 40.31900.0
For 24 test ink bottles á 10ml
without content.

Cotton sticks

item no. 40.31700.0

for the application of test inks tested
100 pieces 15cm long
Ideal for handling from large glass bottles.
Suitable for single use on dirty surfaces.

Light

item no. 40.31600.0

For better recognition of the test pattern.